Pickup Bed Accessories
Hidden Latches
Pop-Up Load Tie Downs
Hidden Latches
Hidden Latch Kits feature small stainless steel brackets that attach to the inside of the tailgate, spring loaded catches that install in the bedside (hidden by the stake pocket posts) also made of stainless and nylon, and nylon woven check straps with stainless buckles that hold the tailgate in a horizontal position. The kit includes all fasteners, hardware, and complete instructions.
Hidden Latches
Pop-Up Load Tie Downs
Hidden Latches
Uses striker plates to hold the tailgate shut.
These hidden latch assemblies are housed within the tailgate itself and are actuated by two small knobs on the inside of the tailgate. Nylon latch bolts and stainless steel strikers assure smooth, quiet and rust free operation that won't damage your paint.
Comes with check straps.
Specify if 16" or 21" required.
Pop-Up Load Tie Downs
Pop-Up Load Tie Downs
Pop-Up Load Tie Downs
Stainless Steel Tie Down Anchor
- 2 piece set, retractable
stainless steel truck hooks.
- Mounts securely into stake holes without drilling.
- Made from high grade stainless steel that will never rust.
- Works with or without bed liners
- Locks down flush and pops up when needed.
- Spring loaded pop-up tie down with a push of a button, it pops up read for use.
- Could be mounted in bed floor
if a suitable hole was cut.
- Also use for whatever you dream up.
Check Straps
Bed Roll Plugs
Pop-Up Load Tie Downs
Our Check Straps are designed to replace tailgate chains that damage your custom paint job. They are a woven nylon strap with stainless steel buckles. Kits come in pairs, with all necessary stainless steel hardware and instructions.
Check Straps
Bed Roll Plugs
Bed Roll Plugs
2 sizes available:
16 inch straps (For beds with tailgates UNDER 14 inches tall)
21 inch straps (For beds with tailgates OVER
14 inches tall)
Included in our Hidden Latch Kits.
Bed Roll Plugs
Bed Roll Plugs
Bed Roll Plugs
Made from Aluminium
Bed Roll 1 5/8" Chevy, 1940 to 1987
Bed Roll 1 1/4" Ford, 1951 to 1972
Bed Roll 1 1/8" Pros Pick Beds
Sold in pairs.
Hot Lite'z for Bed Rolls
Hot Lite'z for Bed Rolls
Hot Lite'z for Bed Rolls
Bed Rolls are often unsightly because they are impossible to paint. Cure the problem with Bed Roll Hot Lite'z. Brilliant LED Bed Roll Hot Lite'z provide tail, signal and brake Illumination.
Various sizes available.
1940-1987 Chevy use 1 5/8" items.
Hot Lite'z - Red
Hot Lite'z for Bed Rolls
Hot Lite'z for Bed Rolls
Designed to fit into the bed roll of your truck, Hot Lite'z will not only dress up an otherwise sore looking spot, but also provide the added safety of rear lighting. The aluminium housing comes polished, but is easily reworked to accept paint.
(Retaining rings are used when installing in a flat panel).
Hot Lite'z - Amber
Hot Lite'z for Bed Rolls
Hot Lite'z - Amber
Sizes Available:
Bed Roll 1 5/8" Chevy, 1940 to 1987
Bed Roll 1 1/4" Ford, 1951 to 1972
Bed Roll 1 1/8" Pros Pick Beds
Sold in pairs.
Pop-Up Fuel Cap
Pop-Up Fuel Cap
Hot Lite'z - Amber
This is the slickest Fuel Filler Gas Cap out there! This product is manufactured from aluminium with a smooth matt finish.
To open the cap you press the centre,
turn slightly counter clockwise and the
cap will pop up.
Pop-Up Fuel Cap
The dimensions are 2 1/2" in diameter and 3/32" above the mounting surface.
NOTE: A 1/8" hole may be drilled in centre of plastic cap for a vent (located on back of aluminium cap).
Pickup Bed Wood Kits
Stainless Steel "WOW" Strips
Stainless Steel "WOW" Strips
Stainless Steel "WOW" Strips
Carriage bolts break up the flowing lines of the bed strips and constantly collect dirt that is difficult to remove. Solution?
Crafted from stainless steel, "WOW" Strips maintain the shape and contour of original strips but have a sliding "T" bolt type of fastener on the bottom of the strip. One part number fits all makes and models. 7 piece set, 82 inches long (T-bolt Kit NOT included; necessary for installation).
Bed Side Angles
Stainless Steel "WOW" Strips
Stainless Steel "WOW" Strips
Recommended on 1932-1947 Ford Models
and all Chevys.
Available in polished stainless steel only -
without punched holes.
2 lengths available
80" long £60
96" long £120
Sold singularly.
T-Bolts
Bed Wood
Bed Wood
T-bolt Fasteners 49 piece set, use without side angles - £100
T Bolt fasteners 64 pc set, use with side angles - £125
Bed Wood
Bed Wood
Bed Wood
Pro's Pick Bed Wood Kits are made from the finest quality kiln dried white oak available. Boards are hand selected for grain match to ensure the best looking floor possible.
To achieve the best 'look', our Bed Wood Kits have no holes for bed mounting bolts.
White Oak Bed Wood & stainless strip Kit
In Stock:
Included in this kit are the following parts:
9 White Oak Timbers
7 Stainless steel 'Wow' Strips (no bolt holes)
72 Stainless Steel sliding 'T' Bolts, washers and nuts
No VAT on this item.
Dimensions:
This is a Pro's Pick white oak bed wood kit and stainless steel strip kit.
Each piece of timber measures:
80" (2030mm) long x 5 1/2" (140mm) wide.
There are 10 timbers in this kit.
Each 'Wow' strip is 82" (2083mm) long.
There are 7 'Wow' strips in the kit.
Smooth TailGate
Smooth Tailgates
By Pro's Pick Eng.
By Pro's Pick Eng.
Manufactured from 16 gauge satin coated steel, Pro's Pick tailgates ride on hinges that are hidden within the rear cross member. When viewed from the rear of the vehicle the tailgate appears to float in the opening with no apparent means of attachment.
Tailgate Kits include Hidden Latch & Hinge Assemblies & Rear Cross-member.
By Pro's Pick Eng.
By Pro's Pick Eng.
By Pro's Pick Eng.
Makes & years covered:
Ford: 1932 - 1972
Chevrolet: 1930 - 1987
Dodge: 1936 - 1947
Pro's Pick Smooth Tailgate
In Stock:
Included in this kit are the following parts:
Smooth Tailgate
Smooth Cross member – sits below tailgate
2 Weld-in plates
2 Steel hidden hinges (a pair)
2 Steel hinge pins
2 White plastic sliders
2 Large striker plates
2 Black springs
2 16” nylon straps
2 Aluminium latch knobs
2 ¼” nut inserts
1 36” foam tape
4 5/16”x3/4 button head screws
4 No.8 phillips self tap screws
4 ¼”x3/4 button head screws
1 No.8 1” hex head self tap screw
Instructions
No VAT on this item.
Dimensions:
This is a custom smooth tailgate made by
Pro’s Pick Engineering.
It measures:
59” (1500mm) long x 14” (355mm) high x
1 3/16” (30mm) thick.
The smooth cross-member also included measures 57” (1448mm) long – this is the external flange to flange dimension.
3” (76mm) high x 3 1/4” (82mm) deep.
It could be sectioned if too large for your pickup.
Pro's Pick Smooth Tailgate
Tailgate & Cross-Member
Tailgate & Cross-Member End View
Tailgate & Cross-Member End View
Tailgate & Cross-Member End View
Tailgate & Cross-Member End View
Tailgate & Cross-Member End View
Tailgate End View - Inside
Tailgate & Cross-Member End View
Tailgate End View - Outside
Tailgate End View - Outside
Tailgate End View - Outside
Tailgate End View - Outside
Cross-Member Back View
Tailgate End View - Outside
Cross-Member Back View
Cross-Member Flange
Tailgate End View - Outside
Cross-Member Back View
Hidden Hinges
Hidden Hinges
Hidden Hinges
Steel hidden hinges with machined bushes.
Check Straps
Hidden Hinges
Hidden Hinges
Nylon & Stainless 16" Check Straps
will prevent your paint from chipping.
Release Knobs
Hidden Hinges
Striker Plates & Sliders
Machined aluminium release knobs with stainless threaded stud are located on the inside of the tailgate for that clean look.
Striker Plates & Sliders
Striker Plates & Sliders
Striker Plates & Sliders
Stainless steel striker plates and white plastic sliders which are located on the inside of the tailgate. This provides quiet latching.
Weld in Plates
Striker Plates & Sliders
Weld in Plates
The weld in plates are used to mount
the rear tailgate cross member.
Hardware
Striker Plates & Sliders
Weld in Plates
All hardware is included.
Slider springs, sealing strip,
threaded inserts & stainless bolts.
Fulton Sun Visor - sold
Genuine Original Fulton Sun Visor
Genuine Original Fulton Sun Visor
Genuine Original Fulton Sun Visor
Genuine Original Fulton Sun Visor
Genuine Original Fulton Sun Visor
Genuine Original Fulton Sun Visor
Fitting Kit
Fitting Kit
Original GM Canvas Bag
Fitting Kit
Original Instructions
Original GM Canvas Bag
Original GM Canvas Bag
Original GM Canvas Bag
Original GM Canvas Bag
Original GM Canvas Bag